In addition to being aesthetically pleasing and durable, modern furniture should also possess excellent intrinsic qualities. Due to ABS's low shrinkage rate and high heat distortion temperature, it boasts good dimensional stability and will not undergo excessive shrinkage or expansion due to large temperature differences. This characteristic is of great significance for the storage and transportation of edge banding and furniture products. In contrast, traditional PVC edge banding has a low

Hot-melt adhesives are increasingly widely used in furniture edge banding, but there are many difficulties encountered during use. The following is a specific analysis of common problems in the bonding of edge banding hot-melt adhesives by Zhubang Adhesives:I.Edge banding falling off: Check whether the operation is correct, and operate in accordance with the machine operation requirements and the correct parameters of hot-melt adhesives; Check whether the edge banding machine is normal; Check wh

Common Problems in Furniture Edge Banding and Their AnalysisI. Edge banding tends to fall off during the trimming process1、The adhesive is applied too thinly;2、The material is too cold or damp (especially when the adhesive has just been applied);3、If the glue line is clearly visible and shows the pattern of the glue application roller, it may be that the temperature of the glue application roller is too low;4、The speed of the conveyor belt is too slow;5、The ambient temperature or the temper

With the innovation of technology and the gradual improvement of people's living standards, PVC edge banding has gradually become an indispensable part of our furniture, and two-color edge banding has also gradually been widely used. So, how should we trim the edges during the decoration of two-color edge banding? And what other issues should we pay attention to?First of all, the blunting of the trimming milling cutter will directly affect the quality of end trimming and edge trimming. Moreo

Maintenance of Wooden Furniture: Following the Rhythm of the Seasons.Wooden furniture adheres to the natural property of wood—expanding when wet and shrinking when dry. It may deform, shrink, or crack due to changes in its moisture content. Therefore, the core of furniture maintenance lies in addressing the fundamental issue of the material’s own moisture content. Just as the principle nourish in spring, dispel heat in summer, replenish in autumn, and conserve in winter guides human health mai

Edge banding hot melt adhesive is a type of adhesive specifically used for edge banding of artificial boards. It is a solvent-free thermoplastic adhesive. When the hot melt adhesive is heated to a certain temperature, it transforms from a solid state to a molten state. After being applied to the surface of the artificial board substrate or edge banding material, it cools and turns back to a solid state, bonding the edge banding material and the substrate together.1、Binders of Edge Banding Hot M